| This belay/rappel device
has multiple functions - great for the average
climber and guide alike. Belay one or two
ropes in "normal" fashion (off your harness)
or switch to "auto locking" mode by attaching
your REVERSO to your belay anchor (at the
top of the pitch). In this mode, you can
belay one or two followers and in the event
of a fall the REVERSO will lock up yet allow
you belay each rope independent of the other.
Use with a locking biner on 7.5-9mm twin
and half ropes or 8.9-11mm single ropes.
Shown at right in "rappel mode".
Clip REVERSO's small hole (at top of photos)
to transport and rig the device to reduce
chance of fumbling and dropping. Rope with
REVERSO can then be clipped to belay loop
after rigging properly - see instructions
included. New forged constuction with V-shaped
friction channels and asymetrically grooved
side walls for durability and improved control.
Delivered any where in the US.
|