9. Product Safety Advisory 5/17/96

ATTENTION: OMEGA PACIFIC CARABINER OWNERS! INPECTION NOTICE:

Omega Pacific has discovered that (2) Omega Pacific Standard Symmetrical Non-Locking “D” Carabiners were not properly riveted at the hinge end of the gate. One carabiner was from Lot #H and one carabiner was from Lot #OI. These carabiners were manufactured in NOVEMBER 1995, prior to Omega Pacific's move to its new facility.

If you have an Omega Pacific Standard Symmetrical Non-Locking “D” carabiner stamped with Lot #OH or Lot #OI, (purchased after NOVEMBER 1995), please inspect the rivet at the pivot end of the gate by pushing on the rivet. If there is noticeable movement, RETURN the carabiner to Omega Pacific for replacement at the following address:

Omega Pacific, Inc.
PO BOX 1780
Airway Heights, WA 99001-1780

Or

Omega Pacific, Inc.
Bldg A1
11919 W. Sprague Ave.
Airway Heights, WA 99001

You may also return a carabiner from the above lot numbers for inspection. Upon receipt, we will inspect your carabiner for the above condition. If it exists we will replace the carabiner. If it does not exist, we will return your carabiner.

It is Omega Pacific's quality control process to individually inspect all our carabiners and we apologize for any inconvenience this may cause. However, Omega Pacific strongly recommends that you always inspect all of your gear prior to use. If you have any questions about any Omega Pacific products, please contact us at (509) 244-0949.